|
|
|
Heavy Cat Status
Group: Moderators
Last Login: 2 days ago @ 7:34:42 AM
Posts: 366,
Visits: 1,098
|
|
@griffinavid i know this sounds dumb but i forgot how to name the songs and patterns can you help me out?
Naming works the same way for pattern and song, Page 44 at the bottom
NAME A SONG (NAME)
1. Press RECORD SETUP. If the Song has been named, the name will show on the top line. If the
Song has not been named, the display says NO NAME.
2. Enter the name using the PAGE RIGHT/LEFT buttons to select the character to be changed
(selected character is indicated by a cursor underneath it), and the INC/DEC buttons or Value Dial
to select the desired character. Lower case and upper case letters, numbers, punctuation, and
various special-purpose characters are available. You can also enter numbers with the number
buttons.
Saving patterns: Page 35 of the manual
---------------------------
SAVING A PATTERN
The following operation will save the selected Pattern, including all sub-patterns (A, B and FILL) to a
specific location, overwriting any data which may already exist. Please note that you need to save your
Patterns if you wish to access them after you power-cycle the unit.
1. The XR20 should be in Pattern mode and stopped.
2. Select the Pattern you wish to save.
3. Press and hold the SAVE / COPY button, and keep holding
it down until step (6). The display says SAVE TO PATT.
4. Enter the destination Pattern number with the INC / DEC
buttons, number buttons or the VALUE dial.
5. Press REC (DO IT). The display says SAVE DONE.
6. Release the SAVE / COPY and REC (DO IT) buttons.
------------------------------
Saving Songs: Page 44 of the manual
SAVING YOUR SONG
When you are finished putting together your Song, you will need to save it to permanent memory.
Please note that all Song data will be lost if you turn off the XR20 before saving your Song.
1. The XR20 should be in Song Mode.
2. Use the INC / DEC buttons, the number keypad or the
VALUE dial to select the Song which you would like to
save.
3. Press and hold the SAVE / COPY button.
4. Press REC (DO IT) to save the song. The display will
show SAVE DONE.
5. Release the SAVE / COPY button.
-------------------
The manual is also on the AKAI site. All you need to do is drop a little contact info.
|
|
|
|